TL-ER6120 can't route LAN host that obtain from DHCP Server to LAN host that obtain from PPPoE Server.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-ER6120 can't route LAN host that obtain from DHCP Server to LAN host that obtain from PPPoE Server.
Model : TL-ER6120
Hardware Version : V1
Firmware Version : 1.0.7 Build 20140113 Rel.63736
ISP : Korea Telecom
I configured the TL-ER6120 as follows.
1. In LAN WEB UI menu, I enabled DHCP Server with start IP 10.100.10.100 and end IP 10.100.10.199.
2. In PPPoE WEB UI menu, I enabled PPPoE Server with IP Address Pool 192.168.200.100-192.168.200.199.
3. I connected my notebook1 with TL-ER6120 LAN Port 1 and my notebook1 got IP addess 10.100.10.100 from DHCP Server.
4. I connected my notebook2 with TL-ER6120 LAN Port 2 and my notebook2 got IP addess 192.168.200.100 from PPPoE Server.
5. I tried the ping test from notebook2 to notebook1. The result was passed.
6. I tried the ping test from notebook1 to notebook2. The result was failed.
For above step 6 being passed, what I do or configure more ?
Thanks in advance.
Hardware Version : V1
Firmware Version : 1.0.7 Build 20140113 Rel.63736
ISP : Korea Telecom
I configured the TL-ER6120 as follows.
1. In LAN WEB UI menu, I enabled DHCP Server with start IP 10.100.10.100 and end IP 10.100.10.199.
2. In PPPoE WEB UI menu, I enabled PPPoE Server with IP Address Pool 192.168.200.100-192.168.200.199.
3. I connected my notebook1 with TL-ER6120 LAN Port 1 and my notebook1 got IP addess 10.100.10.100 from DHCP Server.
4. I connected my notebook2 with TL-ER6120 LAN Port 2 and my notebook2 got IP addess 192.168.200.100 from PPPoE Server.
5. I tried the ping test from notebook2 to notebook1. The result was passed.
6. I tried the ping test from notebook1 to notebook2. The result was failed.
For above step 6 being passed, what I do or configure more ?
Thanks in advance.
