:PPPoE send PADI timeout error

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

:PPPoE send PADI timeout error

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
:PPPoE send PADI timeout error
:PPPoE send PADI timeout error
2015-09-22 16:03:37 - last edited 2021-04-19 11:08:20
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

Hi,

Hoping someone here will be able to help me with a question?

We have a TP-Link TL-ER5120 load balanced router with three modems connected to it on WAN1, WAN2 and WAN3. WAN1 and WAN3 are connected to the Internet ok, but WAN2 will not connect. Looking at the Network Status window for WAN2 it shows the link as Up and then cycles between Connecting... and Disconnected.

Looking at the logs it reports <5> : WAN2:PPPoE send PADI timeout. over and over. I have tried rebooting the router via the Maintenance section but this has not helped. Any ideas on what the problem could be?

Many thanks,
Simon
  0      
  0      
#1
Options
13 Reply
Re::PPPoE send PADI timeout error
2015-09-23 04:47:15 - last edited 2021-04-19 11:08:20
How about the DSL modem? Is it in bridge mode? (not router mode)

Are you able to connect to the DSL with a different router? I'd check that first. Usually, to get PPPoE working you'll need only the right username and password.
  3  
  3  
#2
Options
Re::PPPoE send PADI timeout error
2016-05-27 23:21:26 - last edited 2021-04-19 11:08:20
Hola buenos dias, tengo el mismo problema con un TL-R480T+, me aparece PPPoE send PADI timeout., el router esta configurado en modo puente y el usuario y la contraseña estan actualizados, que problema puede ser?
  1  
  1  
#3
Options
Re::PPPoE send PADI timeout error
2016-05-27 23:37:54 - last edited 2021-04-19 11:08:20


  0  
  0  
#4
Options
Re::PPPoE send PADI timeout error
2016-08-03 11:23:57 - last edited 2021-04-19 11:08:20
i have same issue as well
  1  
  1  
#5
Options
Re::PPPoE send PADI timeout error
2016-08-22 13:30:28 - last edited 2021-04-19 11:08:20
Hello,

I' have the same issue. I had 2 providers. This start with the 1st one and still work with the other one. Now the other one has the same issue.

Can you help please!!!

Regards

David
  0  
  0  
#6
Options
Re::PPPoE send PADI timeout error
2016-08-23 15:59:28 - last edited 2021-04-19 11:08:20
I'm also having the same issue on a TL-ER5120. TP-Link please fix this!
  0  
  0  
#7
Options
Re::PPPoE send PADI timeout error
2016-09-01 01:48:46 - last edited 2021-04-19 11:08:20
I get this "send PADI timeout" error also and my connection fails, a reboot always cures it for a while before needing to repeat after a day or two. This is what the logs look like



































2016-08-31 11:53:41 <5> : WAN1:IPCP is up, local:, peer: , DNS X DNS. Y
2016-08-31 11:53:41 <5> : WAN1:CHAP authenticated.
2016-08-31 11:53:41 <5> : WAN1:LCP is up, MTU:1480, AUTH:CHAP.
2016-08-31 11:53:41 <5> : WAN1:LCP is up, MTU:1480, AUTH:CHAP.
2016-08-31 11:53:41 <5> : WAN1:PPPoE discover phase over, AC-MAC:, Session-ID:0x4e3.
2016-08-31 11:53:40 <5> : WAN1:PPPoE start connecting automatically.
2016-08-31 11:53:34 <5> : WAN1:PPPoE send PADI timeout.
2016-08-31 11:53:30 <5> : WAN1:PPPoE send PADI timeout.
2016-08-31 11:53:26 <5> : WAN1:PPPoE send PADI timeout.
2016-08-31 11:53:22 <5> : WAN1:PPPoE send PADI timeout.
2016-08-31 11:53:18 <5> : WAN1:PPPoE start connecting automatically.


I also get these on occasion











2016-08-30 01:39:22 <5> : WAN1:CHAP authentation timeout.
2016-08-30 01:39:20 <5> : WAN1:CHAP authentation timeout.
2016-08-30 01:39:18 <5> : WAN1:CHAP authentation timeout.


Did anyone find out what the issue is related to?

Chunks
  0  
  0  
#8
Options
Re::PPPoE send PADI timeout error
2017-02-22 16:46:40 - last edited 2021-04-19 11:08:20
Hi, there
Can anyone post a screen shot about the configuration of WAN connection? Maybe I can help you to check the setting.
  0  
  0  
#9
Options
Re::PPPoE send PADI timeout error
2017-07-11 11:17:53 - last edited 2021-04-19 11:08:20
Hi, there,
I do have TL-ER5120 v2 as well and found the same issue. [ WAN1:PPPoE send PADI timeout.]
Attached is the WAN1 configuration.
If I connect a Linksys router, the problem is gone. That means, it has something to do with
TL-ER5120 v2
Please help.
Thanks, Jeet.


  0  
  0  
#10
Options
Re::PPPoE send PADI timeout error
2018-02-10 05:28:20 - last edited 2021-04-19 11:08:20
I have the same issue.
ISP is O2, Other Router works fine, but with DSL-Modem i get PADI Timeout error.
Every external Komponents are ok (Modem Splitter).
  2  
  2  
#11
Options

Information

Helpful: 0

Views: 13671

Replies: 13

Related Articles