Internal LAN VPN Routing (Site-to-Site)
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Internal LAN VPN Routing (Site-to-Site)
Model :
Hardware Version : Not Clear
Firmware Version :
ISP :
I need some assistance routing my internal LAN within a site-to-site VPN with NAT routers. I was created a static route from the first network to the VPN side. 192.168.101.0 -> 192.168.200.0. that is working.
My main issues is form 192.168.98.0 -> 192.168.101.0 and from 192.168.99.0 -> 192.168.101.0
Is there a setting on routers (tl-r600vpn) that will allow the routeing of internal lan traffic.
I am including a network diagram and not dure what other information may be required. The red lines are routes that are currently working.
https://dl.dropboxusercontent.com/u/58850968/vpnnet.png
please let me know, Thank you for the assistance.
Hardware Version : Not Clear
Firmware Version :
ISP :
I need some assistance routing my internal LAN within a site-to-site VPN with NAT routers. I was created a static route from the first network to the VPN side. 192.168.101.0 -> 192.168.200.0. that is working.
My main issues is form 192.168.98.0 -> 192.168.101.0 and from 192.168.99.0 -> 192.168.101.0
Is there a setting on routers (tl-r600vpn) that will allow the routeing of internal lan traffic.
I am including a network diagram and not dure what other information may be required. The red lines are routes that are currently working.
https://dl.dropboxusercontent.com/u/58850968/vpnnet.png
please let me know, Thank you for the assistance.
