Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

I had to move about 300 feet away while my home is been renovated and i'm trying to setup 2 cpe 510's so i can still use my 240 meg internet. I do have direct line of sight.

I wanted to connect the one cpe as a transmitter connected to my modem,dhcp etc disabled so it has a fixed ip ie. 192.168.0.12 to use and have the other cpe connected to my router which would be on the same channel, subnet and also a fixed ip such as 192.168.0.13. which in turn is wired to 2 pc's and a server with no wireless devices.

To me, it seems i want to do a point to point configuration as i just want to transmit my internet connection and allow the router at this end to worry about dhcp.

That way i'm only transmitting my internet signal between the 2 cpe's and letting the router at this end worry about the internal network in my room.

Am i right in my reasoning or am i missing something?