I mistakenly disconnected power to my ER605.  When reconnecting power, none of the RJ45 LEDs lit up and I lost internet.  I verified proper 12V from the wall wart and reconnected it again.  No LEDs lit up on the RJ45s.  So I did a hard reset with the reset button on the front panel.  I do get blinking LEDs on the RJ45 ports but I still can't access the internet, nor my OC200.  I tried hard resetting again, but the System light does not blink rapidly (announcing the reset is complete).

I plugged a laptop directly into the LAN port of the ER605 and I get an odd IP address and cannot reach out to the internet.  Is the ER605 broken?