Firmware u upgrade
Dear Teams
I am currently using the TP-Link Omada Controller OC200 Ver 1.37.11 along with EAP access points. Today, after updating the Omada Controller, I received an error stating that one device is using outdated firmware.
I checked with TP-Link, and they confirmed that there is no newer firmware available for this device at the moment.
Please advise how we can resolve this issue or clear the warning if the device is already running the latest supported firmware.
Thanks for posting in our business forum.
May I ask if the current firmware version of your switch is T1600G-28PS(UN)_V3_20200805?
With the update of Omada Controller, some devices with outdated firmware would receive such tip. Since the T1600G-28PS has been end of life, you can check the detail information on this with the screenshot below or check our official explanation with the following link as well:
What should you do when the Omada Network v6 adopts device with outdated firmware?
Thanks for posting in our business forum.
May I ask if the current firmware version of your switch is T1600G-28PS(UN)_V3_20200805?
With the update of Omada Controller, some devices with outdated firmware would receive such tip. Since the T1600G-28PS has been end of life, you can check the detail information on this with the screenshot below or check our official explanation with the following link as well:
What should you do when the Omada Network v6 adopts device with outdated firmware?
Dear Sir,
Please see the attached screenshot as requested.
The switch was purchased around 15 months ago and is now showing as end of life. Kindly confirm whether it can still be used.
At the moment, it is not possible to purchase a new switch, so your advice on continued usage would be appreciated.
