Business Community > All Threads > TP-LINK TL-WA5210G many deconexion
< All Threads

TP-LINK TL-WA5210G many deconexion

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP-LINK TL-WA5210G many deconexion

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-LINK TL-WA5210G many deconexion
TP-LINK TL-WA5210G many deconexion
2016-02-25 17:53:40
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

Hello;

Can i please get help for my issue with may AP outdoor TP-LINK TL-WA5210G.

This outdoor is configured as AP Acces Point, it was working properly but this last days it's disconnect (we loose wifi access from our wifi devices).

When we want to connect we can't (it's take a moment for searching and after we have nothing)

I try every thing (Decreasing power,disable High power mode.......) but no result.

The outdoor work for a moment and after we loose wifi connection, and when we reboot it; our wifi devices can connect and this is repeating each time.

The ip part of the network is working fine.

Here the reference of the firmware and hardware: Firm :4.4.8 Build 130502 Rel.61441n Hard: WA5210G v1 081640EF

Thanks in advance for your support.
  0      
 
  0      
 
#1
Options
5 Reply
Re:TP-LINK TL-WA5210G many deconexion
2016-02-25 21:35:47
Read about this behavior a lot on 5210, you own a V1 my advise, upgrade to TP-STATION need to read all the thread and you can Google to understand the process, the files are one before last siddhantpatel001 post here is the link https://forum.openwrt.org/viewtopic.php?id=48725
  0  
  0  
#2
Options
Re:TP-LINK TL-WA5210G many deconexion
2016-02-26 14:49:56
Sounds like the interference is severe. Don't select 'Auto' in channel option. Fix the working channel to 1/6/11.
Besides, when the disconnection issue occurs, could you login in the device via Ethernet cable?
  0  
  0  
#3
Options
Tp link wa5210g
2016-02-27 04:44:57

stupidbird wrote

Sounds like the interference is severe. Don't select 'Auto' in channel option. Fix the working channel to 1/6/11.
Besides, when the disconnection issue occurs, could you login in the device via Ethernet cable?


yes, when the disconnection issue occurs i can connect via the ethernet cable without any problem.

I m using the Channel 13 .

In the same time i use two other channel for 2 a point to point connections with channels (3 and 8).

For your information the two antennas (tp-link also) are far of about 30 meter from the access point antennas.

Now i fix the channel to 11 and i keep it under monitoring.
  0  
  0  
#4
Options
Re:TP-LINK TL-WA5210G many deconexion
2016-02-27 11:42:39

cidou wrote

are far of about 30 meter from the access point antennas.

That's a ridiculous distance for 2 CPEs
Lower the power on both to minimum
  0  
  0  
#5
Options
Re:TP-LINK TL-WA5210G many deconexion
2016-02-29 11:43:03
Did you install external antenna on the access point? If yes please tell me the number.
I suspect that's because of the improper deployment which leads to instable connection. Position and angel are important, refer to official FAQ: http://www.tp-link.com/en/faq-1044.html
What's more, in such short distance you can adopt the advice from @danymarc
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1225

Replies: 5

Related Articles
TP-LINK TL WA5210G 2.4GHz
606 0
Tp-link tl-wa5210g & tl-ant2412d
1431 0
Connection problem with TL-WA5210G TP-Link
5066 0
How many devices connect to the TL-WA5210G in AP mode???
888 0
Wifi Is not Working on TP LINK Model No. TL-WA5210G
772 0
tp-link tl-wa5210g access point configuration
2366 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.