Cpe 210 losing internet connection in bridge mode
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Cpe 210 losing internet connection in bridge mode
Model :
Hardware Version : Not Clear
Firmware Version :
ISP :
I have a CPE 210 that I have used successfully in BRIDGEMODE for a year connected wirelessly to a router which is connected to theinternet. It is programmed with its ownSSID and security with DHCP disabled. Allclients of the CPE are wireless. Aboutone month ago the CPE began to intermittently lose connection with the internetand when it did connect it operated quite a bit slower. It would operatecorrectly for a few hours or a few days before it would drop connection withthe internet. It continued to transmitits SSID with the same signal strength throughout. I didnot make any changes to any of the devices prior to this problem surfacing andlocal conditions have not changed to my knowledge.
While troubleshooting I have done several factory restores, reprogrammedthe CPE and my firmware is/was up todate. Disconnecting the power and rebooting did not make it work once itquit. I just seems to resume for noapparent reason. I checked with the ISPand they checked my connection and found no problems. I have tried various settings to no availincluding using the REPEATER MODE. Thesystem log does not seem to update although I am not sure what should be loggedsince clients are getting their IP from the router. The main router(s) have worked finethroughout.
I changed the 50 foot CAT6 cable that I use for POE on theCPE and changed my router to a TP-LINK Archer C5. The identical problems persisted and Iassumed that it must be a function of the CPE that has failed. I bought a new one thinking that would solvemy problems. I have programmed it thesame as the original unit and experimented with various other settings andstill have the problem
I have five days to return the new one for a refund. Any suggestions since the system worked fine for a year?
Bob
Hardware Version : Not Clear
Firmware Version :
ISP :
I have a CPE 210 that I have used successfully in BRIDGEMODE for a year connected wirelessly to a router which is connected to theinternet. It is programmed with its ownSSID and security with DHCP disabled. Allclients of the CPE are wireless. Aboutone month ago the CPE began to intermittently lose connection with the internetand when it did connect it operated quite a bit slower. It would operatecorrectly for a few hours or a few days before it would drop connection withthe internet. It continued to transmitits SSID with the same signal strength throughout. I didnot make any changes to any of the devices prior to this problem surfacing andlocal conditions have not changed to my knowledge.
While troubleshooting I have done several factory restores, reprogrammedthe CPE and my firmware is/was up todate. Disconnecting the power and rebooting did not make it work once itquit. I just seems to resume for noapparent reason. I checked with the ISPand they checked my connection and found no problems. I have tried various settings to no availincluding using the REPEATER MODE. Thesystem log does not seem to update although I am not sure what should be loggedsince clients are getting their IP from the router. The main router(s) have worked finethroughout.
I changed the 50 foot CAT6 cable that I use for POE on theCPE and changed my router to a TP-LINK Archer C5. The identical problems persisted and Iassumed that it must be a function of the CPE that has failed. I bought a new one thinking that would solvemy problems. I have programmed it thesame as the original unit and experimented with various other settings andstill have the problem
I have five days to return the new one for a refund. Any suggestions since the system worked fine for a year?
Bob
