CPE510 Cannot access To Client "B" from "C" And vice versa.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CPE510 Cannot access To Client "B" from "C" And vice versa.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE510 Cannot access To Client "B" from "C" And vice versa.
CPE510 Cannot access To Client "B" from "C" And vice versa.
2016-08-14 01:15:04
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

Hello, Evryone
my first query
I have 3 x CPE510 "A,B,C" connected them:
"A": AP Mode
"B":Client Mode
"C":Client Mode look for picture .....
I can ping PC"G" & PC"F" From PC"E"
and "G" to "E"
and "F" to "E"
My question is : why i cannot ping or access to any Device from Client "C" To "B"



  0      
  0      
#1
Options
5 Reply
Re:CPE510 Cannot access To Client "B" from "C" And vice versa.
2016-08-14 17:29:30
test placing switch aside, connect directly to Archer lan ports
If same results disablie firewall and antivirus on those 2 PCs
Post switch model, and if is a managed switch
  0  
  0  
#2
Options
Re:CPE510 Cannot access To Client "B" from "C" And vice versa.
2016-08-15 14:12:31
and you could check the advanced settings, AP isolation, if it is enabled, the clients devices cannot communicate
  0  
  0  
#3
Options
Re:CPE510 Cannot access To Client "B" from "C" And vice versa.
2016-08-15 15:18:38

YXCY wrote

and you could check the advanced settings, AP isolation, if it is enabled, the clients devices cannot communicate

By default is disabled
  0  
  0  
#4
Options
Re:CPE510 Cannot access To Client "B" from "C" And vice versa.
2016-08-15 17:34:20

danymarc wrote

By default is disabled


:Djust prompt one check point
  0  
  0  
#5
Options
Re:CPE510 Cannot access To Client "B" from "C" And vice versa.
2016-08-26 19:55:17
Thanks "YXY" these solved my problem:)
  0  
  0  
#6
Options