Model :

Hardware Version :

Firmware Version :

ISP :

Hi all

i thought i would create a second thread for this issue.

I wish to use the POE pass through function on my CPE 510 to power a CCTV camera. However the camera requires active POE whereas the CPE 510 seems to only support Passive POE on pass through.

Is there an adapter i can plug into the second port on the CPE 510 to change the Passive to active POE and power the camera? the camera requires a 12v whilst the AP gives out 24v so voltage will also need to be knocked down. Camera does have a 12v jack so a splitter with this functionality might be the answer.

Regards