Smart Switches, VLANs, and DHCP Relay
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Smart Switches, VLANs, and DHCP Relay
Model :
Hardware Version :
Firmware Version :
ISP :
Please bear with me as VLANs are a fairly new concept for me...
I have 2 TL-SG2452 switches (T1600G-52TS) running the latest firmware (1.01_20151031), as well as several UniFi UAPs. On the APs I have two SSIDs configured: one for staff and one for guests. What I'm wanting to do is put the guest traffic on its own VLAN so it will get a separate DHCP scope from everything else on the network.
On switch 1 (main CER) I created a new VLAN and tagged it on port 1 (link to switch 2) as well as ports 25-28 (UAPs). On switch 2 I created the same VLAN ID and tagged port 2 (uplink to switch 1) and ports 45-48 (UAPs). In the UniFi controller I set my guest SSID to use the VLAN that I created.
To test the configuration thus far, I pulled out my smartphone and connected to the guest SSID. As I expected, no IP address. I know I need to configure a DHCP relay on the switches to forward requests to the DHCP server (port 3 on switch 2). However, I can't seem to find the option in the switch GUI. According to the user guide, the DHCP Relay options should be under the Routing menu, but they're not. I have looked all over the admin interface and can't find it.
Have I done something wrong? Is there a hidden firmware update I need that is not published on the support site? Is there a recommended workaround to get DHCP leases to this VLAN? Any advice would be greatly appreciated.
Hardware Version :
Firmware Version :
ISP :
Please bear with me as VLANs are a fairly new concept for me...
I have 2 TL-SG2452 switches (T1600G-52TS) running the latest firmware (1.01_20151031), as well as several UniFi UAPs. On the APs I have two SSIDs configured: one for staff and one for guests. What I'm wanting to do is put the guest traffic on its own VLAN so it will get a separate DHCP scope from everything else on the network.
On switch 1 (main CER) I created a new VLAN and tagged it on port 1 (link to switch 2) as well as ports 25-28 (UAPs). On switch 2 I created the same VLAN ID and tagged port 2 (uplink to switch 1) and ports 45-48 (UAPs). In the UniFi controller I set my guest SSID to use the VLAN that I created.
To test the configuration thus far, I pulled out my smartphone and connected to the guest SSID. As I expected, no IP address. I know I need to configure a DHCP relay on the switches to forward requests to the DHCP server (port 3 on switch 2). However, I can't seem to find the option in the switch GUI. According to the user guide, the DHCP Relay options should be under the Routing menu, but they're not. I have looked all over the admin interface and can't find it.
Have I done something wrong? Is there a hidden firmware update I need that is not published on the support site? Is there a recommended workaround to get DHCP leases to this VLAN? Any advice would be greatly appreciated.