Cant adopt 2 xEAP 110

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Cant adopt 2 xEAP 110

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Cant adopt 2 xEAP 110
Cant adopt 2 xEAP 110
2017-02-19 18:47:16
Model :

Hardware Version :

Firmware Version :

ISP :

I installed 2 EAP110 access points and they are visible in EAP controller but tte system denies adopting the AP's. Username and password are correct but the adoption process just stops after a short period.

Can anybody help me?
  0      
  0      
#1
Options
2 Reply
Re:Cant adopt 2 xEAP 110
2017-03-03 21:11:31
Hi can you please check the EAP controller version and EAP110 Ver.

The EAP and the EAC controller ar ein the same subnet?
Disable the windows firewall and antivirus.

Eventually do an hardware reset of the EAP and use for the adopt the default user and password.
  0  
  0  
#2
Options
Re:Cant adopt 2 xEAP 110
2017-03-06 18:30:03

Efexs wrote

The EAP and the EAC controller ar ein the same subnet?


The EAC is not required to be in the same subnet as the EAP for adopting it. It can be in any network as long as TCP ports 8088, 8043, 29811, 29812, 29813 and UDP port 29810 are open on the system the EAC runs on.

I would suggest using a Windows system dedicated to run only the EAC, either a local system not used for other services or an instance in AWS cloud. WIndows often makes troubles for no obvious reason.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 554

Replies: 2

Related Articles