Ac50 & eap330/ac1900

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Ac50 & eap330/ac1900

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Ac50 & eap330/ac1900
Ac50 & eap330/ac1900
2017-03-30 21:56:14
Model :

Hardware Version :

Firmware Version :

ISP :

Hello,
I bought following hardware:
TL-ER6020
TL-SG108E

and for the wifi part:
Model:AC50(UN) Ver:1.0 FW:1.0.0 Build 20161027 Rel.36667
Model:EAP330 / AC1900 Model:EAP330(EU) ver:1.0.

I followed the guide on: http://nl.tp-link.com/faq-1334.html to get the ap's controlled by the AC50.

But no AP shows up in the status screen of the AC50.
Ping is possible to the EAP330 from the AC50.

DHCP allready switched from TL-ER6020 to AC50, no change ...

TP-Link : I 'm planning to setup a compleet network with 38 EAP330 AP's. this is a small test setup.
Help wanted. please.

Kind regards
ictheh
  0      
  0      
#1
Options
1 Reply
Re:Ac50 & eap330/ac1900
2017-04-01 02:51:59

ictheh wrote


Hello,
I bought following hardware:
TL-ER6020
TL-SG108E

and for the wifi part:
Model:AC50(UN) Ver:1.0 FW:1.0.0 Build 20161027 Rel.36667
Model:EAP330 / AC1900 Model:EAP330(EU) ver:1.0.


Wrong AP. You need a CAP 1750, not an EAP 330 to be able to control it using an AC50. The CAPs (CAP1750 and CAP300 currently) are hardware-controlled APs, while the EAPs are software-controlled APs.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 590

Replies: 1

Related Articles