Setting for Dante with TPlink switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Setting for Dante with TPlink switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Setting for Dante with TPlink switch
Setting for Dante with TPlink switch
2017-04-25 17:33:31
Model :

Hardware Version :

Firmware Version :

ISP :

Can some of the technical to advised me how to configure, I have done some fine tune. But my customer still saying there is some noise when the sound multicast from this riser to anther riser. is it something to do the multicast setting/IGMP? cause on the same riser there is no noise when playing the sound.


I have configure the QoS and The igmp snooping as per manual.


56 (priority 3)
46 (priority 2)
8 (priority 1)
other (priority 0)




TL-SG2210P(11 unit, outside wall mount rack)​, TL-T1600G-28PS​(1 unit, in Data centre). All use multiimode fiber connection back to DC.


manual


https://drive.google.com/file/d/0B-xjwEXHWMVaU3YybDJpOXNsY3c/view?usp=sharing
  0      
  0      
#1
Options

Information

Helpful: 0

Views: 4248

Replies: 0

Related Articles