Model :

Hardware Version :

Firmware Version :

ISP :

Hi

I have two CPE 210 (v1.1) units.one is unit is acting as Access point and one unit is acting as Client Mode.The distance between them is 200 Meters which is not much as CPE 210 has coverage range of 5KM. Problem I am having is Client is not able to connect to AP to automatically unless both units are on the same channel .Right now I have to set both (AP and Cleint ) to Channel 11 manually to connect to each other instantly,If channels are not set Client is not able to connect to AP.Currently,both units are behind same DHCP server and I am using Xioami MI-3 (Padavan Firmware) as Router which is acting as DHCP server for both units.As I said when both devices are set to same channel it works flawlessly,Problem occurred when I upgraded to new firmware and they have disabled Manual Channel selection capability on Client Mode.So I cannot set manual channel on Client unit and its set to auto and Units are not connecting.I am using TEST_Mode right now but I have also tried my region Mode and it does not make any difference.Please help as I have totally no Idea why this issue is occurring,Also there is no LOS problem as I can clearly see the other unit.