Hello. Today, the IPv6 support is missing a lot of features : - There are no way to see the IPv6 routes (the Insights->Routing Table page on the controller only shows IPv4 ones) (high priority) - Ther

-The ER7206 needs IPV6 functionality for Wire Guard and DDNS. -Starlink uses CGNAT for their IPV4 addresses. -Therefore, I cannot obtain a public IPV4 IP from Starlink unless I upgrade the service and

Gateway ACL's do not allow IPGroup etc as either source or destination when LAN->LAN used as a direction. Makes a VLAN for IoT unable to punch through to eg: Home Assistant and renders using a separat

EAP773 currently broadcasts a "TP_TX_VAP" SSID when the 6ghz band is active, which is enabled for certain devices with early implementations of WiFi 6E/7. Broadcasting the SSID was employed by several

Hi, I'm currently facing an issue with my EAP670 (EU) access points in conjunction with the Omada Software Controller, as I'm having difficulty identifying free channels on the 5GHz band. I came acros

Hello, I would need to get/see a live list of network connection on ER7212 Omada router - like that as this ( it is from Mikrotik router, for example.) It is possible on ER7212 /Omada ? Very thanks fo