Forums/
Routers
2023-05-18 22:39:05
How can I port forward VPN. Or passthrough VPN. I am trying to forward UDP 1701 to my server. But it does not to work. I setup a server under NAT -} Virtual servers. But it does not seem to work. My...
0HELPFULS
Forums/
WiFi
2021-11-17 01:37:48
@Paul_B1 there are times when the connectors don't match up or a crimp on end warps the plastic a little and one of the pins does not make good contact. because power and communications does not use...
0HELPFULS
Forums/
WiFi
2021-11-16 23:16:09
802.3af and all active Poe is a negiotiated power source. Passive just applies voltage to the line. This can for sure cause problems when the amperage is to high at 48v. I will attach the readings...
0HELPFULS
Forums/
Controllers
2021-04-27 16:51:09
@nbali Im sorry , my work around was to go back to my Cisco RV320 . Im waiting for a solution from TP-Link. so for now my TP-link router is sitting colletcing dust. the worst part is have sold a half...
1HELPFULS
Forums/
Controllers
2021-02-26 02:58:52
deny all protocols, source: network interface for VLAN 30 to destination: other network interfaces/VLANS" - This is at the bottom of the ACL stack. With only this enabled I can't ping/connect to HA...
0HELPFULS
Forums/
Controllers
2021-02-26 02:19:51
@trimmkm By default traffic will flow between vlans. Can you isolate what might be different between the connections that work and those that don't? Wireless / wired? What are you networks per VLAN?...
0HELPFULS