Forums/
Switches
2023-03-06 05:01:04
Hello After upgrading to Omada 5.9.9 and updating the SG2210MP's firmware from 1.0.6 -> 1.0.7, the device became unmanageable. I can't reboot or initialize the device right now, so I'm watching, but...
3HELPFULS
Forums/
Controllers
2023-03-06 00:05:21
Did you solve this problem? I'm having the same problem
0HELPFULS
Forums/
Controllers
2022-11-24 11:43:54
@Hank21 1. Yes. Only the SG2210MP appears to be disconnected from the controller. 2. The picture is the topology including LACP. (By the way, LACP may not be the problem. It seemed to be a problem...
0HELPFULS
Forums/
Controllers
2022-11-24 08:51:44
@처녀 자리 That's right. It appears as a Drop in the controller. No action is possible. Initialization was reset through the Reset button on the switch. And when the setting is finished again, the drop...
0HELPFULS
Forums/
Controllers
2022-11-23 12:16:44
Hi. I have previously written the following thread. This issue was resolved by initializing the SG2210, but after the Omada 5.7.4 update a more fatal problem occurred....
1HELPFULS
Forums/
Switches
2022-10-31 09:25:44
@솜누스 Both ssh disabled/active give the same error.
0HELPFULS