On the OMADA controller I have the default LAN, Lan for mobile devices and guest lan, in the following order: Default: 172.16.20.1/24 - Gateway 172.16.20.1 Mobile: 192.168.10.1/24 - Gateway...

I have a scenario with two offices, one in each physical location. Each office has the same TL-ER605 acting as a router and gateway. I would like to know how do I add these two devices one in each...

@terziyski thanks for your reply. I disabled both firewall, on AX router and on client's laptop. I can connect normally with OpenVPN, (laptop in home) but cannot see any computer's office.

@Stanley3 I have an old Archer C7 1750 (old Tplink logo) and it does have bandwidth control by IP Range. Only I have to do is set IP range and maximum upload/download. And not only one, but it has 5...

TPLINK, tell me you are going to develop a firmware update to make bandwidth control available on TPLink's AX series. I have two AX10 and one AX50 and both AX don't have bandwidth control by IP`range...

@RandGuy123 still nothing about bandwidth control on AX10 and AX50 ? TP-Link, please provide a update the firmware of these Wifi6 routers !!!