Which model is your product and what do you mean by ' I made a hidden wireless network with WPA' ? Not very clear with the problem which you have met...

chs wrote You mean connect directly the CPE to the EAP right ? I can do that, but wich mode do I have to use then (bridge, AP, repeater...) ? No,..I just mean connect the users' wireless devices such...

If the CPE is working at 3-address mode (disable WDS), all the devices will use CPE's MAC to communicate with EAP, and that's why only the 1st time you try to access internet requires a portal...

TL-WA7210N has no TDMA mode. Only Pharos series products such as CPE210 and CPE510 have TDMA mode, besides, TDMA is more suitable for PTMP scenario to improve the whole throughput.

Make sure your [COLOR=#333333]Edimax Router supports channel 136, and double check the channel width settings on both CPE510 and Edimax Router. Besides, as stupidbird mentioned, select test_mode...

2060ft should be ok for CPE510, just tune the angle of CPE510, make them face to face, and make sure a 1[SUP]st[/SUP] Fresnel zone clearance, just a visual line of sight is not enough, refer to:...