Make sure your [COLOR=#333333]Edimax Router supports channel 136, and double check the channel width settings on both CPE510 and Edimax Router. Besides, as stupidbird mentioned, select test_mode...

2060ft should be ok for CPE510, just tune the angle of CPE510, make them face to face, and make sure a 1[SUP]st[/SUP] Fresnel zone clearance, just a visual line of sight is not enough, refer to:...

Make sure the PC which you want to access CPE210's control panel is in a same subnet as CPE210. You can reset CPE210 with the reset button and assign 192.168.0.100/24 to your PC, then you will be...

Pretty cool...huh... I don't think CPE510 will let you down, you can post results here if any update

srmarkovic wrote I dont type MAC address manually, I use Survey button in my TL-WA5210G devices. WEB interface of TL-WA5210G is similar to CPE510 with different colors. My mistake, sorry for that,...

srmarkovic wrote Bottleneck is 5210 bridge. I wanna know if it would be better to use two CPE510 instead 5210? Yes, just move on to CPE510, you will have an unimaginable experience with it,...