AlamLV1Offline
Following: 0Followers: 0
Forums/ Switches
2016-09-30 09:27:03
Re:TL-SG1016DE "Port Trunk setting" lost after unplaned power off
You need to click Save or Save Config button to save the configuration after you finish it.
0HELPFULS
Forums/ Switches
2016-09-30 09:24:24
Re:single broadcast domain across 3 SG-108E switches?
Yes, you can. The TL-SG108E supports 802.1q VLAN. It has no Trunk port, but you can use General Tagged port, they are the same.
0HELPFULS
Forums/ Switches
2016-09-30 09:11:26
Re:ADVICE PLEASE,,, ER5120 and TL-SG2424 or T1600G-28TS
So you want to create 4 VLANs and each VLAN can have different subnets, right? But as you said, the Router can as most have two IP pool, one is in the LAN--DHCP Server and the other is in the...
0HELPFULS
Forums/ Switches
2016-09-30 09:00:55
Re:ARP Inspection enable
you can refer to the UG below on page 279 for help. http://static.tp-link.com/res/down/doc/T2600G-28TS(UN)_V1_UG.pdf
0HELPFULS
Forums/ Switches
2016-09-30 08:51:30
Re:TL-SG3216 1.0 Firmware upgrade failure
If your switch's hardware version is v1.2, then you need to use firmware version v1. And since your present firmware version is too old, it is recommended to upgrade the firmware one by one to the...
0HELPFULS
Forums/ Routers
2016-09-03 12:27:31
Re:Multiple VPN / ISPs between two sites
You can create multi VPN tunnels between two sides.
0HELPFULS
12