stupidbird wrote @Hexulon What's more, CPE210 uses a build-in directional antenna. The energy focus on the front. If you apply Bridge/Repeater mode, you adjust the device to face to AP(point A) and...

danymarc wrote you can do any you like, what has been posted here is best scenario, bridge is repeating, and repeating mode has a 50% or more data penalty rate, so repeating is like Pay one's dues to...

Hi stupidbird, I know that there are several factors, but if the basic configuration is okay that's all I ask for. As regards configuration this will connect CPE "A" with CPE "B" then "A" with "C" -...

danymarc wrote yes and no you never provided distances in the links, if is too short would be overkill, if its too long and not clean LOS, result in no link I would do the next, buy a pair of CPEs up...

danymarc wrote @stupibird never posted that, he wrote, configure 1st (first) CPE is C in your first screen from post #1in Client mode, this CPE receives wireless signal from A, then at the same point...

Hello stupidbird, I appreciate your answer. The thing is I can't wire CPE "A" and "B" because of what I draw in this image: (see image please) Is it possible to set CPE "C" as a repeater from "A" and...