Hi Antonio, Indeed, it is version 1.7. To work with 13W per output should have 0.33 ohm resistors. Best regards, Doru

Hi all, I solved the problem! For those who encounter this problem. Probably the switch which I have is defective. I reduced the value of four resistors on each current output from 1 ohm at 0.5 ohms....

Region : Argentina Model : TL-SF1008P Hardware Version : Not Clear Firmware Version : ISP : Hi, I have the following problem at TP-SF1008P: When connecting three video cameras (3*5W=15W) red LED...