@Vincent-TP Nope it was disabled when the AP was running with Firmware 1.4.2. It was disabled with point 1., and also now after the rollback to 1.3.2 (point) - but everything works, and it also look...

@Vincent-TP Unfortunately not. After the rollback in point 5, firmware 1.3.2 is running, which works with all devices with ARP/Multicast enabled. The latest firmware doesn't work with my current...

@Vincent-TP Start situation: 14 ESPHome flashed Devices (Shelly v1/ESP8266, ESP32 - different manufacturers) 5 Shelly Devices with Original Firmware - latest 10 Tasmota Firmware Devices via MQTT...

@Vincent-TP If I try your configuration without a firmware update (1.3.2): Some Tasmota devices are not accessible via HTTP/MQTT (but are connected and have an IP address). Some Shelly products with...

@Vincent-TP for 1. I have the following SSID-Settings: I also tried WPA/WPA2 PSK/AES, but nothing changed. Configuration on ESP32 (all devices have the same. There are two stored, the closest access...

Hallo Zusammen, ich habe ein Problem mit dem neusten Update 1.4.2 Build 20250318 Rel. 32204 für den EAP 660 HD V1. Ich habe letzte Nacht ein Firmware bei Scheduler gestartet, auf zwei von den...