Forums/
Controllers
2022-12-06 09:47:54
Is it possible to configure MLD snooping when TL-SG2218 is under the control of SDN controller? I read the SDN user manual but can't find anything that looks like MLD settings?
0HELPFULS
Forums/
Switches
2022-03-02 07:50:39
@Hank21 In the current state, independent IP addresses are assigned to each VLAN as described in the thread above. 192.168.10.0/24 for VLAN10 192.168.20.0/25 for VLAN20 ・ ・ ・ 192.168.50.0/25 for...
0HELPFULS
Forums/
Switches
2022-02-28 08:41:28
A DHCP server is set up on the YAMAHA router RTX1210, and some 802.1Q VLANs are created on the switch side. Each VLAN is assigned an independent IP address, 192.168.10.0/24 for VLAN10 192.168.20.0/25...
0HELPFULS
Forums/
Switches
2022-02-28 08:26:57
Thanks @Virgo
0HELPFULS
Forums/
Switches
2022-02-12 04:54:15
I'm looking for a way to access the VLANs configured on the switch on a single port for management purposes.
0HELPFULS
Forums/
Switches
2022-02-10 08:08:28
Is it possible to assign a VLAN ID to a specific IP address? For example. If you connect to the switch with 192.168.10.10, you will be assigned VLANID 10. If 192.168.20.10 is connected to the switch,...
0HELPFULS