@d0ugmac1 ok thanks for your help on this matter, i will asses the necessity for a captive portal, it is something we would 'like' but not a deal breaker. time to start looking at this from the...

When adopting the Management VLAN must be untagged on the switch. Once adopted you can then go to the AP and go to Config and set the Management VLAN setting. Then at this point change the port on...

Hi There, I can't do this as port 2 on the switch (the port the OC200 is patched into) as the port is already untagged on VLAN 1000 which is needed to be able to see the AP's when they come online...

Hi There, I hope you can help a newbie out. I have the following setup: Router - Draytek Switch - HP Aruba J9773A Omada Controller OC200 AP - EAP245(EU)V3.0 Router IP 192.168.15.254 (setup with 2...