mzperxLV1Online
Following: 0Followers: 0
Forums/ Routers
2024-04-17 12:47:50
Re:PPTP VPN client fails to access remote resources through Site-to-Site tunnel
RouterA is ok, I reconfigured the PPTP server and this solved the problem. But on RouterB it didn't work neither the factory reset and manual setting. The difference is that RotuerB have more S2S...
0HELPFULS
Forums/ Routers
2024-04-12 10:44:35
Re:PPTP VPN client fails to access remote resources through Site-to-Site tunnel
What is strange that only PPTP client can access to LAN2 (if it connects to Router1). If I try wireguard (connect to Router1) it doesn't see LAN2. But I'm new in Wireguard may I missed something, I...
0HELPFULS
Forums/ Routers
2024-04-12 10:36:43
Re:PPTP VPN client fails to access remote resources through Site-to-Site tunnel
S2S settings on router2: Mode: LAN-to-LAN Remote Gateway: WAN IP of router2 WAN: WAN Local Network type: Network Local Network: LAN Remote subnet: 192.168.10.0/24
0HELPFULS
Forums/ Routers
2024-04-12 10:26:21
Re:PPTP VPN client fails to access remote resources through Site-to-Site tunnel
Hi @Clive_A, than you for your reply! "BTW, you can still access the local LAN of one of the sites? I mean the C2S connection is okay? " Yes, it is okay on both sides! "Delete the VPN profile and...
0HELPFULS
Forums/ Routers
2024-04-11 15:57:48
PPTP VPN client fails to access remote resources through Site-to-Site tunnel
Hi, I have two ER605 routers which connect two remote offices together and they are worked fine so far. I did a fw upgrade from 2.1.2 to the latest 2.2.4 in 3 steps: 2.1.2 -> 2.2.2 -> 2.2.3 -> 2.2.4...
0HELPFULS
Forums/ Routers
2022-05-16 09:11:58
Re:S2S VPN, only DHCP addresses seen
@Somnus Thank you for your reply! The solution was that I deleted some unused settings from the configuration and this helped. It is strange because these settings were in disabled status.
2HELPFULS
12