@Clive_A Thanks for the follow up I had reset the device and tried doing the experiment again Now when I pull the fiber, its automatically switched to WAN2 May be I messed up some configurations as...

@Tedd404 Thanks for the suggestion I have not enabled Link backup My understanding is that if I enable Link backup Only one (primary) will be used and the backup WAN will only be used when the...

@Clive_A Here is the test result https://www.icloud.com/iclouddrive/002vo_s9IcNnyM5XrzXqQlogw#Screen_Recording_2023-07-24_at_9.35.27_AM Net is working fine I am connected to WAN 1 Ping is also...

@Clive_A Here is my online detection configuration. The test you asked, will send in few minutes

@Clive_A Thank you for your suggestion I understand that it takes some time for detection and switching. I have waited for around 30 minutes and it didn't switch. I tested the same several times and...

I have 2 WAN (internet) connections connected to the ER605 I have enabled the load balancing When WAN1 goes down (physical link is up but no internet) The online detection says WAN1 is offline The...