@dirmwtlsf You can... but they would need to be at the same nic speed on each side. I would aggregate two 10G ports on the main switch. Then set the same setting on the 2nd switch and plug up the...

@dirmwtlsf Well, it comes to affordable switches... most "cost-effective" vendors do not stack. That's a big vendor feature. (cough) If you're looking at combining ports, let's say two 10G ports to...

@Kash01976 I would follow @Virgo advice. I had a client with the same issue. After the forget and full reset on the AP. I had to log into the AP and set the IP address of the controller. that stuck.

@Chartone Are you trying to combine both WAN ports? If so that is "Binding" and the ER605 doesn't do that. Load Balancing and Binding are two different functions. If you want to bind, then you would...

@Napsterbater Yes you are right it looks like a bug and or malfunction of the 660HD. I didn't say it wasn't. I was just trying to point out the basic facts that business-rated APs and home wireless...

@esaad86 This is def not an easy answer. I would use Acrylic Home Wireless Analyzer APP on your laptop and physically check your interference levels in your place. Then manually set your channel that...