KimcheeGUNLV4Online
Following: 4Followers: 2
Forums/ WiFi
Yesterday
Re:EAP770/EAP783, The First Tri-Band Wi-Fi 7 Omada Access Point
@Hank21 This is def an awesome looking product!
0HELPFULS
Forums/ WiFi
Monday
Re:How to check for ai roaming support
@MaxPowers_ I usually go through their Firmware Changelogs to see what features have been added to the devices I'm looking at. I'm a tech geek, so i don't mind. But I don't think there is an easy way...
0HELPFULS
Forums/ Controllers
Sunday
Re:wireless AP's are not found after initial setup
@janaca Reboot everything... Router, switch, and Aps... and see if it picks up an IP. BY chance is the power light on the AP? Are you powering by the SWITCH or POE Injector?
0HELPFULS
Forums/ Controllers
Sunday
Re:wireless AP's are not found after initial setup
@janaca The Router is adopted, right? Log into the controller and look at the client list and if you see APs MACs in the list? Have you confirm the DHCP scope is wide enough? set it to .50-.254
0HELPFULS
Forums/ Controllers
Saturday
Re:wireless AP's are not found after initial setup
@janaca Is it a flat network? No VLANs? The OC on the same LAN as the APs? Also is the OC200 on the newest firmware version?
0HELPFULS
Forums/ Controllers
Saturday
Re:wireless AP's are not found after initial setup
@janaca When adding the wireless / MESH APs... is there enough signal from the MAIN AP in the location you want the APs? Download Acryclic Wireless Analyzer on your laptop and go out to that location...
0HELPFULS
123...