Early Access Omada SDN Controller_V5.15.6.7 Pre-Release Firmware(Released on Nov 29th, 2024)
This Article Applies to
Omada_SDN_Controller_v5.15.6.7 Windows (Windows 10/11/Server, 64bit Recommended)
Omada_SDN_Controller_v5.15.6.7_linux_x64.tar
Omada_SDN_Controller_v5.15.6.7_linux_x64.deb
Overview
We hope to offer you a chance to experience the new features added in the Controller v5.15.6.7 in advance, and also give us TP-Link the opportunity to fully test the firmware in your real network environment and scenarios before the official release. All feedback is welcome, including letting us know about successful upgrades.
Release Notes
New Features
1. Added support for Gateways: DR3650v, ER703WP-4G-Outdoor.
2. Added support for APs: EAP775-Wall, EAP625GP-Wall.
3. Added support to disable ports in the properties window of device.
4. Added support for batch import and export of Radius users in Site View > Settings > Network > Profile > RADIUS Profile > RADIUS Users.
5. Added support to configure DSL Gateway features in Site View > Settings > Wired&Wireless Networks > WAN Mode:
- Virtual WAN
- VoIP
- DSL Dialing
- TP-link DDNS
Enhancements
1. Optimized WLAN Optimization, added support to deploy Channel Width and Channel.
2. Optimized properties window, added support for Loopback Detection in Device > Properties window > Config > Services > Loopback Control.
3. Optimized the following features in Omada App:
- Added support for NTP configuration.
- Added support for Static Routing.
- Optimized properties window of the device
Notes
1. This version of the Controller is fully applied to the Omada APP of version 4.20 or above.
2. Omada SDN Controller can only manage certain devices running the supported firmware. Please confirm that your device is compatible with the SDN Controller.
3. Since version 5.14.32.2, Omada Software Controller no longer supports upgrade from Controller v4.
4. Since version 5.14.32.2, Omada Software Controller(windows) only supports installation on Windows64-bit platform.
Firmware Download
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
(2) For the sake of insurance, it's always recommended to save a copy of the controller Backup Config file before upgrading or downgrading.
(3) You may follow the following guide to upgrade your Omada Controller. How to Upgrade or Downgrade Omada SDN Controller.
Firmware Download Link
-
Direct Download
Omada_SDN_Controller_v5.15.6.7_windows
Omada_SDN_Controller_v5.15.6.7_linux_x64_deb
Omada_SDN_Controller_v5.15.6.7_x64_tar.gz
Additional Information
If somehow you encounter an issue during or after the controller upgrade, it's suggested to contact us with the following info:
- Omada Controller version (previous and current)
- Device Model(s), Hardware and Firmware versions
- (if possible) A copy of the Log file and Backup Config file
If you decide to downgrade the controller before reporting the issue to TP-Link, it's suggested to save a copy of the current Log file and Backup Config file before you do that, which could help to investigate and address the issue quickly.
>> How to get the Log file and Backup Config file for Omada SDN Controller:
-
If your Windows software controller failed to get launched, please locate the controller installation path for the Log file.
-
If it's not a launch issue, you can export the Log file and Backup Config file in the local network.
-
For Omada Controller v5.8 or later version,
In the Global View, go to Settings > Maintenance > Backup & Restore > Retained Data Backup, select Settings Only, then click Export for the Backup Config file. On the same page, scroll down for Export for Support, click Export Running Logs for desensitized Log file.
-
For Omada Controller v5.6 or v5.7,
Go to Settings > Maintenance > Backup & Restore > Retained Data Backup, select Settings Only, then click Export for the Backup Config file. On the same page, scroll down for Export for Support, click Export Running Logs for desensitized Log file.
-
For Omada Controller v5.5 or previous version,
Go to Settings > Maintenance > Backup & Restore > Retained Data Backup, select Settings Only, then click Export for the Backup Config file . Go to Settings > Services > Export Data > Running Log to export the Log file.
-
Update Log
Dec 10th, 2024
Update the download links to official ones.
Nov 29th, 2024
Provide the following controller firmware for early access.
Omada_SDN_Controller_v5.15.6.7_pre-release_windows
Omada_SDN_Controller_v5.15.6.7_pre-release_linux_x64_deb
Omada_SDN_Controller_v5.15.6.7_pre-release_x64_tar.gz
Recommended Threads
TP-Link Early Access Program Is Now Available!
Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Shoresy wrote
MrAdministrator wrote
Dirty upgrade from 5.15.6.4. Everything seems to be working fine, but the cloud firmware pool is now empty - no firmwares for any of my devices in any category. Before the upgrade it was showing the release firmwares for everything and betas for some.
I've noticed the same...I thought however that rather than this being a bug, that TPL may have pulled those firmwares making them unavailable for whatever reason.
I doubt they pulled the firmwares on the cloud pool, they were present immediately before I upgraded (I checked). It might be that the firmwares have to be approved for a given controller version, and something like a new beta version hasn't been approved yet, which might be a recurring theme with new betas if so.
- Copy Link
- Report Inappropriate Content
Shoresy wrote
Hi @Vincent-TP Yes...since Cloud Access is a setting within the admin UI, it makes sense for the main admin (whether cloud or local) to be able to change that setting, as the admin account can with any other settings for the site. The Cloud main admin has the ability to login locally directly from the local server running Omada, so why not allow the Cloud main administrator to make changes when they're logged in locally from the Omada controller?
The process of logging into a controller with a cloud account (whether locally or via cloud) requires cloud access. If given the cloud account the option to disable cloud access, it will disconnect the connection. It's like disabling yourself, which is unreasonable.
- Copy Link
- Report Inappropriate Content
Hi all,
If you failed to launch the controller and the error message is as the following picture, please refer to this post:
What to Do when Your Controller Reports Exit Code while Starting?
- Copy Link
- Report Inappropriate Content
Shoresy wrote
MrAdministrator wrote
Dirty upgrade from 5.15.6.4. Everything seems to be working fine, but the cloud firmware pool is now empty - no firmwares for any of my devices in any category. Before the upgrade it was showing the release firmwares for everything and betas for some.
I've noticed the same...I thought however that rather than this being a bug, that TPL may have pulled those firmwares making them unavailable for whatever reason.
Did you enable this option? Please try to disable and enable this option, and click Save.
If the issue persists, please share us with some screenshots of the issues you are describing. Thanks.
Edit on Dec 12th:
Sorry I missed the picture:
Please enable this option and let us know the result:
- Copy Link
- Report Inappropriate Content
Note to self...
never try an update if you are not well rested...
You're absolutely right of course and with dpkg it went smoothly.
- Copy Link
- Report Inappropriate Content
Vincent-TP wrote
Shoresy wrote
MrAdministrator wrote
Dirty upgrade from 5.15.6.4. Everything seems to be working fine, but the cloud firmware pool is now empty - no firmwares for any of my devices in any category. Before the upgrade it was showing the release firmwares for everything and betas for some.
I've noticed the same...I thought however that rather than this being a bug, that TPL may have pulled those firmwares making them unavailable for whatever reason.
Did you enable this option? Please try to disable and enable this option, and click Save.
If the issue persists, please share us with some screenshots of the issues you are describing. Thanks.
I don't see any way to toggle the firmware management feature. I did turn off then on the early access program with no success.
As you can see at the bottom, there are no firmwares or devices listed of any kind. Immediately before the update, I checked this page (I was curious if different firmwares would be available....) and every device I manage had firmware listed under the "Stable" tab, with some having firmwares listed under "Beta".
- Copy Link
- Report Inappropriate Content
Finally got around to install this on my home Ubuntu 20 VM. All seems to be working. Even remote access.
Seems smooth so far!
- Copy Link
- Report Inappropriate Content
Thank you so much for your info. We don't have this issue locally.
To further investigate the issue, we created a support ticket to collect some info, and the case ID is TKID241213663.
Please kindly help with us.
- Copy Link
- Report Inappropriate Content
Do I need to contact support with this case ID? Or is there another avenue to submit whatever information is needed?
Edit: nevermind, support contacted me.
- Copy Link
- Report Inappropriate Content
Vincent-TP wrote
Thank you so much for your info. We don't have this issue locally.
To further investigate the issue, we created a support ticket to collect some info, and the case ID is TKID241213663.
Please kindly help with us.
I'm seeing the same issue with the firmware(s) not showing up...seems to be related to the Omada release and not a localized user issue.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2833
Replies: 22
Voters 0
No one has voted for it yet.