@Tedd404 first, I am in the USA. All 3 225-outdoor are on channel 149 with firmware 5.07 (up to date according to Firmware Upgrade) OC300 with 1 internet and 1 225-od connection 2 225-od on each side...

@btx thanks for the info. I've reset all EAPs to use 5Ghz, channel 149 and disabled 2.4Ghz. However, the EAP265HD still is not appearing.

@Tedd404 All EAPs have been on for about 20 hours. The 3 225's are now functioning properly in the Mesh, the 265 never shows up as an available device in Omada Cloud Controller. The 265 is in the...

All Firmware up to date. The 225's still don't see the 265.

KimcheeGUN wrote @Jeff_Quux Is the newly added AP updated to the newest firmware? Have you tried to adopt it, update it, disconnect it, and launch it remotely? Also - are you sure you have enough...

I have 3 EAP225-Outdoor devices connected to a OC300 (1 via Cat5, 2 wireless) which are working fine. Trying to add the EAP265HD to the mesh and it is never discovered. If I make the 265 the Main...