MarytechLV1Online
Following: 0Followers: 0
Forums/ Switches
2022-09-04 23:37:53
Re:TL-SG3428X ACL No Effect
@Fae Here is another ACL that doesn't seem to work: Jetstream(config)#show access-list Combined access list 1100 name: "test" rule 9999 deny logging enable Jetstream(config)#show access-list...
0HELPFULS
Forums/ Switches
2022-09-04 04:17:10
Re:TL-SG3428X ACL No Effect
@Fae Thank you I have applied the firmware update. Jetstream#show system-info (…)  Hardware Version - TL-SG3428X 1.0 Software Version - 1.0.7 Build 20220606 Rel.58990 SDM enterpriseMix...
0HELPFULS
Forums/ Switches
2022-09-01 09:21:44
Re:TL-SG3428X ACL No Effect
@Fae Could the firmware be made available on the Canadian site? The most recent version there is TL-SG3428X(UN)_V1_20210409 https://www.tp-link.com/ca/support/download/tl-sg3428x/#Firmware
0HELPFULS
Forums/ Switches
2022-09-01 00:41:07
Re:TL-SG3428X ACL No Effect
@Somnus I have also tried that: > Jetstream#show access-list > MAC access list 100 name: "Allow IP" > rule 10 permit logging enable type...
0HELPFULS
Forums/ Switches
2022-08-26 02:04:37
TL-SG3428X ACL No Effect
I configure the following ACL to allow only ARP and IPv4 traffic: > Jetstream#show access-list > MAC access list 100 name: "Allow IP" > rule 10 permit logging enable type 0800 > rule 20...
0HELPFULS
Forums/ Switches
2022-08-19 08:00:43
Re:1. How to configure IPv6 loopback? 2. 255.255.255.254 invalid mask
@Virgo Which address is supported and how do I enter it? Devices aren't supposed to even know about ULA
0HELPFULS
12