I have been working with this 3 AP Outdoor Mesh for a few days now. Hardware includes OC200, 2x EAP225 Outdoor (wireless) and a EAP610 Outdoor (wired). The Mesh is just not working out and not...

@Philbert Appreciate your attempt to help me figure this out. If there is something incorrect, its in the settings. The CPE are not the culprit since the issues exists without them. The OC200...

@Philbert Ok so I will leave the CPE in place with MESH off. Roaming does not work. I have tried over and over and phones stay connected to the intial AP unless you just leave the park and lose...

@Philbert I basically have what you show in the diagram with the expection of one less CPE710. I have the two CPE710 in client mode, connected to the EAP610. So I have the below x2 with an EAP610...

My current setup is as follows.. 1x EAP610-Outdoor Centrally located and wired to router/modem 2x EAP225-Outdoor Connected to EAP610 via CPE710 in Client Mode on Channel 161 (required for CPE to...

@Philbert Thanks. I understand that explanation. The only time roaming would be beneficial is if guests walk around the park on their phones. I have walked around with my Note 10 Plus and it hangs on...