@Clive_A switched the port manual to 100 Mbit Full Duplex. -> Worked. Thank you.

Hi, I got different PoE Devices connected to my SG3428XPP-M2 v1.20 Switch. However I got Problems with a Roombooking System which powers up but no data is going through. The switch is telling me the...

Hello, I have two Networks 1. 192.168.100.0/24 2. 192.168.200.0/24 The Router is managed by Omada OC200 Controller. Network 192.168.100.1 /24 is configured by default with VLAN ID 1 over all LAN...

I think I found the solution. Here is what I configured. For the remote Site I configured the Network/IP-Range first under -> Preferences -> IP Group -> IP Address add an IP-Range or Subnet here and...

Hi, yes but I'm missing some functions to get this work. For example I was looking at the firewall settings to set a rule Deny FROM "VPN X" oder "LAN 192.168.3.0/24" TO internal LAN. But I did not...

Hi, I configured a Site to Site VPN between TP-Link ER7206 and a WatchGuard Firewall. VPN is up and access is from both networks possible. Now I want the access only in one direction. How can I...