bszLV2Online
Following: 0Followers: 0
Forums/ Routers
2 weeks ago
Re:IPv6 ACLs not working
I will answer myself. I connected an AVM Fritz!Box Fiber and it just working with the port rule on the AVM so it should be definitly on the gateway! @Clive_A can I somewhere fill a bug report?
0HELPFULS
Forums/ Routers
3 weeks ago
Re:IPv6 ACLs not working
I did - I use nmap to check a specific port. Even will all protocols allowed, it is not working. It is just ignoring the allow rules. The deny rules work. Can you please confirm - just to be very...
0HELPFULS
Forums/ Routers
3 weeks ago
Re:IPv6 ACLs not working
Any ideas?
0HELPFULS
Forums/ Routers
2024-11-10 07:46:13
Re:IPv6 ACLs not working
@Clive_A sure! LAN
0HELPFULS
Forums/ Routers
2024-11-07 19:00:43
Re:IPv6 ACLs not working
@Clive_A Gateway ACL. I tried to deny Ports and IPs, but traffice goes through, even Permit Rules are disabled. Switch ACL. Deny works, but Permit not Permit Rule Port (same for Gateway and Switch)...
0HELPFULS
Forums/ Routers
2024-11-04 10:02:34
IPv6 ACLs not working
Hi, I want to be able to reach a service on a server through IPv6. The server is connected to a TL-SG3428MP v4.0 which is connected to an ER707-M2. With no ACL configured I can reach it (and all...
0HELPFULS