@MR.S i have 20 years in networking and data center maintenance as active CTO. the problem untill now is not my knolage about nrtworking is about how EAP is working with trunks and tagged and...

@SoulRaven all off my AP ar working with trunk and trunk access vlan. the openwrt has not any problem with trunking and access mode on ports. the question is what is the reson that EAP requires...

@KJK native vlan is 1 Port Mode Encapsulation Status Native vlan Gi0/1 on 802.1q trunking 1 Gi0/3 on 802.1q trunking 1 Gi0/4 on 802.1q trunking 1 Gi0/45 on 802.1q trunking 1 Gi0/46 on 802.1q trunking...

@MR.S done is not working, still only the management is working the DHCP server has traffic only from VLAN100 and the cisco switch has: switchport trunk allowed vlan 1,14,100 my concusion is that...

@MR.S here are the screenshots the UI is easy to setup, the problem is how the eap225 worki with trunks and what is the reason that is not working with recular cisco switches. each VLAN has a...

@MR.S is added already and ignored, because the default is vlan 1. any other vlan is accepted because is not default. but adding switchport access vlan 1 will be ignored because already is 1