@Virgo @das1996 Thanks for the guidance. I went with 1GB backhaul for this project as the rack is located in an office environment. The fans were too loud in the SG3210XHP-M2. Re-configured to the...

@Virgo If I have all three APs wired directly to the 2.5GB ports on the switch, does that provide more "breathing room" than if two (or three) APs are sharing a 1GB trunk? Even with 50 typical office...

@Philbert @Virgo Thanks for the confirmation. I thought that Maximum Power Consumption was the magic number I needed to hit - but wanted to be sure as I set about selecting switches for this LAN. I...

Specifying-out a new SMB LAN initially deploying three EAP670s. We expect an average of 15-20 active Wi-Fi connections per AP with bursts up to 50 during office hours. Traffic is a mix of Citrix VPN,...

I am planning a new VLAN network and will be deploying 3 - EAP670 APs. These three will have nearby electrical outlets but I may add two more that would need to use POE power. The EAP670...

@KimcheeGUN Thank you for the reply and the straight talk. It's the Mack truck effect I am after: VLANs so I can separate out IoT devices, a more robust guest network, L2+ management, and the ability...