Hi @Rapid You can disable mesh site-wide. Open the site, navigate to Settings->Site Settings(General Settings), Scoll Down to Wireless Features->Enable and un-check it.

@MRCAPTOBVIOUS Another user had similar issues. Did you see this: https://community.tp-link.com/en/business/forum/topic/656106?replyId=1324918

Hi @MRCAPTOBVIOUS, The clients may not support the channel the AP is able to use. On the AP, try setting the 5GHz channel to a lower value, probably 144 or less would work. Some devices may not like...

@Houseofdreams_ And the "VLAN20" port profile has Native Network as VLAN20, only one untagged member (VLAN20) and no tagged members? If you set you computer's IP to a VLAN60 address and both computer...

Hi @Houseofdreams_, When you mentioned the printer had a "static VLAN60 IP", did you access the printer configuration and save the ip address in the printer itself, or did you reserve that IP for the...

Sorry @CarloPH, I did indeed miss those details. 🤦♂️Could the TL-POE170S be bad? Does the SG2008P have 30W surplus to power the SG2005P-PD with one camera and bypass the TL-POE170S for a test? Any...