Hi @Winterwhite, Some alternatives to get above 1GB... Add another 10G copper switch (ex. DS105X) between the MC420L and ER7412-M2. The switch would negotiate the 10G and 2.5G connections...

Hi @notaek, Be sure "US" is the correct region for you device and that the device's version is correct. Usually the controller finds the most recent firmware that's correct for your device. Manually...

@Vincent-TP, appears to be working normally with eth1 disabled now. I'll post back to this thread if anything changes.

Hi @Thomas777, Have you verified that there are not any other devices using addresses within your dhcp pool range?

Hi @1TRUTH1GOD, I'm not sure what you mean by re-connect all the cameras manually as they are not devices that can be adopted by the controller. You do not need to unplug them while adopting the...

@David_J, the firmware release that changed the name was build number 20230818, so I would expect that v4 would be generally available. That said, I don't think all sellers use a different SKU for...