D-CLV3Offline
Following: 0Followers: 0
Forums/ Switches
2025-02-12 15:20:33
Re:SG2210MP - Omada or Jetstream ?
Hi @David_J, Make sure you get the V4 or later 2210MP. The JetStream TL-SG2210MP(UN) 4.0/4.6 are the same as Omada SG2210MP(UN)4.20/4.26. I assume it's the older JetStream versions are EOL. For...
1HELPFULS
Forums/ Gateways
2025-02-10 21:22:17
Re:Issues with setting up Omada network using a ER707-M2 gateway
@arife35, Try setting the Default Gateway in the LAN settings to 192.168.0.1 Default Gateway - (Optional) Enter the default gateway which is assigned by the DHCP server. It is recommended to enter...
0HELPFULS
Forums/ Wireless
2025-02-10 15:00:07
Re:EAP 615 WALL - bug - if eth1 turned off wifi speed drops to 10 Mbps
@Vincent-TP, @Grigoletto is the OP. I just added additional information and didn't intend to hijack the post.
1HELPFULS
Forums/ Wireless
2025-02-08 23:27:49
Re:EAP 615 WALL - bug - if eth1 turned off wifi speed drops to 10 Mbps
@Vincent-TP, on the 615, eth1 has a dummy/unused VLAN and no VLANs on eth2 or eth3 ports (disabled). I have multiple SSID mapped to VLANs and all of these are tagged members on the switch port...
2HELPFULS
Forums/ Switches
2025-02-08 14:27:21
Re:SG2005P-PD does not boot up when PoE device is plugged
@CarloPH, seems the issue is isolated to the SG2005P-PD. Not sure there's much else to do other then try a replacement.
1HELPFULS
Forums/ Gateways
2025-02-07 16:22:47
Re:Issues with setting up Omada network using a ER707-M2 gateway
@arife35, in the controller, once you select the site, look in Settings->LAN. If this is all new, you should only see one interface. Click the edit icon to see the config.
0HELPFULS
1212223...