Hi @RaRu, You might consider the EAP211 Bridge Kit which is cheaper than the 215 kit. Theoretically the mesh option could work, but it would be my last choice, especially if it was also my job to...

Hi @Houseofdreams_ You're not required to use the controller for everything, but once you get past a little learning curve I think you'll like it. Regarding your specific issues... Adopting the AP:...

@johndpar although your not using 10G SFP+ modules, I think these are good guideleines from Install guide for TP-Link's SM331T module.

@johndpar, I'm not sure it's a good idea to use load up the SFP+ ports with copper transceivers due to the heat. If your switch supports DDM you may want to check that too. It's not supported in...

1. Not familiar with the Aruba 1930, but if it supports VLAN then it should work. 2. Trunk ports on the SG3428 would have the VLAN "tagged", so the port linking the SG3428 to the Aruba 1930 should...

The correct way is the way that works. Just be aware that devices connected to the "default" VLAN will now be on what you consider your management VLAN.