Hi @Procorp, Any way to verify that the POE injector is not the problem? I don't think the 245 has a DC power option so maybe you can power the EAP245-2 from an isolated port on your switch to...

Hi @johndpar, I currently have a T1600G-28TS lagged (2 RJ45 ports) to a SG3428X using LACP. It's active on the SG3428; my T1600G donesn't have an active/passive option, but it works w/o any issues....

@ASD_AuZ the gateway is not needed. There are two basic config items to make it work. One is the PVID needs to be set to your management VLAN on the port that connects to your oc200 (set in the Port...

@warllo It's either the cable or config. I have sg2210mp lagged to a sg3824x so going from SFP to SFP+ can work with DAC. Tripple check that the speed/duplex match (1000FD) on both ports. If that's...

I upgraded to the official controller firmware (2.13.2 Build 20240110 Rel.78759) and then upgraded the EAP615 to v 1.2.3. It's been a week now and the AP has not been disconnecting the clients as it...

@nasheayahu As the other poster noted, more information about your setup would be helpful. For example, what's the VLAN config of the ports where the controller, EAP and pfsense are connected? Can...