D-CLV3Online
Following: 0Followers: 0
Forums/ Wireless
2025-02-18 22:34:45
Re:Omada EAP-235 Stuck at 100 Mbps Instead of 1 Gbps
Hi @NazariiLutsyk, Any damage to the eight small wires inside the AP's RJ45 port? 1000 Base-T requires all eight wires to be connected end to end, 100 Base-T needs just four. If any of the four extra...
1HELPFULS
Forums/ Wireless
2025-02-18 12:29:25
Re:Can I use 783 with 773 together?
Hi @pinkman, The only reason I can think of to get the same model is you can swap identical devices to isolate issues when troubleshooting. Otherwise you can just get any of the models that have the...
0HELPFULS
Forums/ SOHO Switches
2025-02-15 00:32:17
Re:small network with unifi AP and guest access
@smallfreak, the VLAN equates to a subnet. A VLAN aware router can act as a virtual router for each virtual LAN and it can do all the internet routing too. It can also provides DHCP and/or other...
1HELPFULS
Forums/ Wireless
2025-02-14 23:22:46
Re:EAP215-Bridge KIT(US)_V2_1.0.2 Build 20241209
@notaek, there should be a link to the release notes with the download.
0HELPFULS
Forums/ SOHO Switches
2025-02-14 20:22:56
Re:small network with unifi AP and guest access
Hi @smallfreak, Once you stated "internet router is equally ignorant" it's basically the end of any question about VLAN setup. You would need to upgrade your router to something that support VLANs to...
1HELPFULS
Forums/ Switches
2025-02-14 17:31:43
Re:SX3008F switch transmits with TP-link 1000mbit SFP+, NOT with 10G SFP+?
Hi @Winterwhite, Some alternatives to get above 1GB... Add another 10G copper switch (ex. DS105X) between the MC420L and ER7412-M2. The switch would negotiate the 10G and 2.5G connections...
1HELPFULS
1789...