@ttocsr Further update. With only the problematic AP powered I set the 5G radio tx power to medium. 2.4G and 6 are enabled and set to high. I tried both of the other APs (individually powered) with...

For some reason, clients wouldn't switch to this AP, so I disabled the other two APs. There are now 55 clients connecting to this AP. The problem appeared right away. I ran a ping in the controller...

@Hank21 Clients do not seem to have issues connecting to the AP. Clients have throughput or no dataflow issues. I have had the issue with the other APs, but mostly it seems like the one has this...

I have 3 EAP773 connected to a SX3206HPP switch. Clients will start to experience issues. If I ping the EAP773s by their management IP I notice that one will have packetloss. After rebooting the AP...

@Clive_A thanks, I am speaking of the actual management VLAN feature. I found it odd that there was no LAN selection where I enabled DPI. I think this is what I'm missing. Where do I select the LAN...

@Clive_A I have the controller connected via management vlan 4090. I have no ACLs setup between VLAN 1 and VLAN 4090, I'm able to ping between the subnets setup on each vlan. Does the controller have...