Finally it works! In the "Local network" I thought it was necessary to indicate the IP range that was used by the VPN... when no, it's really the local IP range that we want to use in our network! In...

@MR.S Following your remark, I updated the version of my router to see if OpenVPN would be better supported. There is progress! Indeed now, when I open the VPN tunnel, then I go to the router routes,...

@MR.S I don't know exactly which server it is, it's really complicated to get information from the people who manage this service, so I was going to try to copy the configuration present on...

If I look at WatchGuard's configuration to try to copy its configuration, it uses the virtual IP 192.168.113.8, but it also creates a Gateway 192.168.113.1, I don't have this Gateway created on my...

@MR.S The only thing I can ping is the local IP address assigned by my VPN connection (192.168.113.3), but I think I'm missing something, I'm not used to doing this. I'll try to simplify, I have a...

Hello, I have an ER707-M2 router with several VLANs configured, this side works very well, all my VLANs have internet and work very well! On the other hand, I currently have to connect "manually"...