Evanloh2001LV1Online
Following: 1Followers: 0
Forums/ Controllers
2 weeks ago
Re:Adopting devices from another network to my controller
@Vincent-TP Thanks for getting back to me on this and the link was very helpful. However, can i know If Site B had ipaddress of 10.65.10.1/24. After adopting to my omada controller at Site A. Do i...
0HELPFULS
Forums/ Controllers
2 weeks ago
Adopting devices from another network to my controller
Hi guys, i have OC200 and i wish to know whether am i able to adopt omada devices from another network? Site A has OC200 Site B has ER605 TPLINK EAP What ive tried is resetting both devices at site B...
0HELPFULS
Forums/ Routers
2024-10-10 02:38:18
Re:How to allow 2 vlans to share the same subnet?
Hi @Clive_A Really appreciate your quick reply! So yes even with different interface they can communicate but may need nDNS to discover it. Okay. I will look into the vlan document you sent as well...
1HELPFULS
Forums/ Routers
2024-10-10 01:55:48
Re:How to allow 2 vlans to share the same subnet?
Hi @Clive_A Thankyou for replying! If VLAN interface communicates by default. Do i still need create a trunk port on the switch? Currently i have IoT VLAN interface at 192.168.18.1/24. Example where...
1HELPFULS
Forums/ Routers
2024-10-09 06:58:03
How to allow 2 vlans to share the same subnet?
Router - ER706W Switch x2 - SG2210P Controller - OC200 APs x9 - EAP650 wall mount 3 VLANS: Default VLAN 192.168.8.1/23 Guest VLAN 88.88.88.1 For the 3rd VLAN which i intend to put as IoT VLAN, is it...
0HELPFULS
Forums/ Routers
2024-09-30 01:30:52
My ER605 router stuck in preconfigured
Hi, Im currently using omada cloud based controller to controll the router (ER605). However, i couldnt get it to adopt and its stuck at preconfigured. I've tried resetting --> enable cloud based...
0HELPFULS