The TL-SG116P data sheet gives only the maximum power consumption. I want to know how much the switch consumes on its own, without POE devices connected. I know my devices' consumption is very low,...

Thank you again for your help. The problem was a conflict of subnet ranges. The router ER605, which unites the two ISPs and connects to the WAN of the C1200, had the gateway 192.168.0.1. As the...

@terziyski, as I mentioned in my last post, I know now what I should do: set up rules for this router that prevent devices connected to it from having access to the secondary router (ER605, the one...

A quick update. I just found out that the regular WiFi Channels do have internet connection. The problem was not that the router did no work but that due to my network configuration with a primary...

The Firmware is 3.0.8 Build 20211219 Rel. 66975 (US), the latest. I am in Panama, (LatAm) but the device is a US version (Archer C1200 v3.0). There is no filtering of any kind. In Security, Access...

Thank you. I have watched the video. It shows how to enable WiFi and create a WiFi password. All this is set correctly. Wifi is enabled for both bands. The Wifi signal is present, but it does not...