@CableWhisperer By default, on Omada all VLANs can reach each other and every VLAN can reach the WAN. Your current configuration is basically fine—go ahead and apply it, then double-check that each...

@flrwrzl Please first disable “Block Ping from WAN” in the location shown, then reboot the router. Additionally, temporarily place the NAS in the DMZ and see if the issue persists. If you have...

@mhoam Thank you for your suggestion. Regarding your concern, V2 and V2.20 will continue to share the same firmware. I have also forwarded your feedback to the UK website team, urging them to upload...

@ArnoLa To help assist and streamline the identification of the behavior, we recommend sending an email to forumsupport.usa@tp-link.com with the following information: Subject: [Forum Escalation][ID...

@matanel Thank you for your post. For your requirement, you can consider configuring Port Security to lock specific MAC addresses to certain ports. Please refer to the following FAQ for the setup...

@Yesrab Thank you for your post. The TL-SG108E does not support management by the Omada Controller. Below is a link to the switches that are compatible with Omada Controller management.Omada Switches